DAHUA

NVR4208-EI

8CH 1U 2HDDs WizSense Network Video Recorder

• Smart H.265+/H.265/Smart H.264+/H.264/MJPEG decoding format. 
• Access, storage or forwarding at 256 Mbps (180 Mbps when AI function enabled). 
• Max. decoding capability: 16 × 1080p@30 fps. Supports adaptive decoding. 
• AI by NVR: 1-channel face detection and recognition; 2-channel perimeter protection; up to 10 face databases and 20,000 face images; 4-channel SMD Plus. 
• AI by Camera: Face detection and recognition, perimeter protection; SMD Plus; people counting; stereo analysis; heat map. 
• Connected to the third-party network cameras. 
• Security baseline 2.3.

NVR4232-4KS3

32CH 1U 2HDDs Lite Network Video Recorder

• Supports Smart H.265+, H.265, Smart H.264+, H.264 and MJPEG decoding formats.
• Max. decoding capability: 8 × 1080p@30 fps or 2 × 8 MP@30 fps.
• Max. 160/128/60 Mbps incoming/recording/outgoing bandwidth.
• Supports IP cameras with a resolution up to 12 MP.
• AI by Recorder supports 2-channel SMD Plus.
• AI by Camera supports face detection and recognition, perimeter protection, SMD Plus, people counting, stereo analysis and heat map.
• Supports EPTZ, and one-click arming and disarming.

NVR1108HS-W-S2

8 Channel Compact 1U 1HDD Network Video Recorder

• New 4.0 user interface.· One-click wireless pairing to IPCs.
• Automatic pairing to IPC in 120 s after boot-up under undisturbed conditions.
• Automatic cascading of IPCs for long-distance surveillance.
• 4–ch@1080P (25FPS), self-adaptive decoding capability.
• Supports mainstream cameras of ONVIF protocol.
• Smart H.265/Smart H.264
• VGA/HDMI simultaneous video output, maximum resolution of HDMI is 1080P
• Remote configuration and management of IPCs, such as setting parameters, acquiring information and upgrading IPCs of the same model in batches.
• DHCP (Dynamic Host Configuration Protocol), HTTP (Hypertext TransferProtocol), NTP (Network Time Protocol) and DDNS (Dynamic DomainName System).

• Outputs 180° wide angle splicing image.
• Outputs max. 8 MP (4096 × 1860)@20 fps.
• H.265 codec, high compression rate, ultra-low bit rate.
• Built-in IR LED and warm light, the max. IR illumination distance is 25 m and warm light distance is 20 m.
• ROI, SMART H.264 +/H.265+, AI H.264/H.265, flexible coding, applicable to various bandwidth and storage environments.
• WDR, 3D NR, HLC, BLC, digital watermarking, applicable to various monitoring scenes.
• Alarm, supports max. 256 G Micro SD card; built in dual Mic; built in speaker, support two-way talk.
• 12 VDC/PoE power supply, easy for installation.
• IP67 protection.
• Sound and light alarm (red and blue lights).
• EPTZ: Enlarge and track the targets of intelligent alarms.
• SMD 4.0.
• One-tap arming/disarming through alarm input.

NVR5208-EI

8 Channels 1U 2HDDs WizSense Network Video Recorder

• Smart H.265+/H.265/Smart H.264+/H.264/MJPEG decoding format.
• Max. decoding capability: 32 × 1080p@30 fps or 8 × 8MP@30 fps.
• Max. 384 Mbps incoming/recording/outgoing bandwidth.
• Support AcuPick with Max. 16-Channel.
• Support N+M cluster.
• AI by recorder: 2-channel face detection and recognition, 4-channel perimeter protection, and 8-channel SMD Plus.
• AI by camera: Face detection and recognition, perimeter protection, SMD Plus, metadata, ANPR, stereo analysis, heat map, and people counting.
• Security baseline 2.3.

Hard Disk non inclusi

NVR5432-EI

32 Channels 1.5U 4HDDs WizSense Network Video Recorder

• Smart H.265+/H.265/Smart H.264+/H.264/MJPEG decoding format.
• Max. decoding capability: 32 × 1080p@30 fps or 32 × 2MP@30 fps.
• Max. 384 Mbps incoming/recording/outgoing bandwidth.
• Support AcuPick with Max. 16-Channel.
• Support N+M cluster.
• AI by recorder: 2-channel face detection and recognition, 4-channel perimeter protection, and 8-channel SMD Plus.
• AI by camera: Face detection and recognition, perimeter protection, SMD Plus, metadata, ANPR, stereo analysis, heat map, and people counting.
• Security baseline 2.3.

NVR5864-EI

64 Channels 2U 8HDDs WizSense Network Video Recorder

• Supports Smart H.265+, H.265, Smart H.264+, H.264 and MJPEG decoding formats. 
• Max. decoding capability: 32 × 1080p@30 fps or 32 × 2MP@30 fps. 
• Max. 384 Mbps incoming/recording/outgoing bandwidth. 
• Supports IP cameras with a resolution up to 32 MP. 
• Support AcuPick with up to 32 channels. 
• Support N+M cluster. 
• Support Raid0/1/5/6/10. 
• AI by recorder: 2-channel face detection and recognition, 4-channel perimeter protection, and 8-channel SMD Plus. 
• AI by camera: Face detection and recognition, perimeter protection, SMD Plus, metadata, ANPR, stereo analysis, heat map, and people counting. 
• Security baseline 2.4.

NVR2104-I2

Channel Smart 1U 1HDD WizSense Network Video Recorder

• Smart H.265+/H.265/Smart H.264+/H.264/MJPEG decoding format
• Max. decoding capability: 6 × 1080p@30 fps. Supports adaptive decoding
• 1-channel face detection and recognition (AI by NVR); 1-channel perimeter protection (AI by NVR); up to 10 face databases and 5,000 face images; 4-channel SMD Plus (AI by NVR);
• AI by camera: Face detection and recognition, perimeter protection, and SMD Plus
• Connected to the third-party network cameras
• Security baseline 2.1 

NVR4232-EI

32CH 1U 2HDDs WizSense Network Video Recorder

• Smart H.265+/H.265/Smart H.264+/H.264/MJPEG decoding format.
• Access, storage or forwarding at 256 Mbps (180 Mbps when AI function enabled).
• Max. decoding capability: 16 × 1080p@30 fps. Supports adaptive decoding.
• AI by NVR: 1-channel face detection and recognition; 2-channel perimeter protection; up to 10 face databases and 20,000 face images; 4-channel SMD Plus.
• AI by Camera: Face detection and recognition, perimeter protection; SMD Plus; people counting; stereo analysis; heat map.
• Connected to the third-party network cameras.
• Security baseline 2.3.